Stickler Promatac Clear can be printed with a variety of print techniques from letterpress, flexo, offset and screen printing.
It is recommended to let printed graphics cure effectively for a full 72 hours before lamination and applying. This will help prevent edge-curling once it is applied. For graphics that are diecut, it is recommended to leave 5mm of unprinted media all the way around the edge.
|Grammage||ISO 536||110 + 5 g/m2|
|Caliper||ISO 534||80 microns|
|Gloss 70° (%)||TAPPI T480||>65|
|Breaking %||ISO 1924||>200|
AP940 Permanent Acrylic
Permanent acrylic adhesive. High tack and excellent adhesion on a wide variety of materials, including apolar substrates (like PP and PE). Good adeing resistance to heat and sunlight with usage on slight rough textured surfaces. This adhesive complies with FDA 175.105
|Composition||Water based acrylic|
|Minimum application temperature||+5°C|
|Service temperature||-30 to +120°C|
|Tack FTM9||8 N/Inch|
|Final tack FTM2||9 N/Inch|
WK135 White one side siliconized clay kraft coating.
|Caliper||ISO 534||150 + 10% microns|
|Grammage||ISO 536||135 + 10% gsm|
|Laminate shelf life||24 months stored at 20°C and 50% RH|
|Typical laminate caliper||245 microns|
This technical specification includes our experience and know-how regards the following:
- a) The composition of our products b) Their generic adhesive qualities normalised by means of the ISO procedure and regarding the international rule Finat
generally accepted in this sector. Any reference to final use is subjected to our good knowledge and opinion and does not imply specific irrevocable guarantees for final use in end product labelling and packaging. Over and above these standards the product user is responsible for assessing, testing and ensuring the specific scope of the label in certain applications by means of prior generic official approval.