Description
Face Material:
| Properties | Test Method | Result |
| Grammage | ISO 536 | 80 g/m2 |
| Caliper | ISO 534 | 88 microns |
Adhesive:
LT1 – Laser Tac 1 LT1
is a permanent acrylic adhesive, emulsion water based, offering a perfect combination of initial tack and adhesive strength, and an outstanding adhesion to most substrates. LT1 is a multipurpose adhesive suitable for laser printing applications and high converting speeds. Recommended for use on smooth, curved substrates with a diameter > 30mm.
| Properties | Test Method | Result |
| Peel adhesion (N/25mm) | FTM 1 | ≥8.8 |
| Initial tack (N/25mm) | FTM 9 | ≥ 4.9 |
| Cohesion (h) | FTM 8 | ≥3 |
| Minimum application temperature | 5°C | |
| Service temperature | -20°C to +70°C |
Backing:
Uncoated white kraft paper with a high quality clay coating for good dimensional stability, density, and lay flat properties. Consistent thickness and excellent strength for die cutting.
| Properties | Test Method | Result |
| Caliper | ISO 534 | 87 microns |
| Grammage | ISO 536 | 82 gsm |
Shelf life:
2 years when stored in its original packaging, at 23 °C and 50% relative humidity. Do not expose to direct sun light. The substrate should be free of dust and lubricant before application. Any unused portion should be rewrapped in the original packaging. This product should be tested thoroughly under use conditions to ensure it meets the requirements of the specific application.
Oji Label have tested this product and believe the results to be reliable for the above technical information and recommendations. However, it is not a guarantee and warranty since the products are used outside of Oji Labels control, and can take no responsibility for any damage or consequences that may occur when using this product. Oji Label do not authorise any parties to give such guarantee or warranty. Above technical information and recommendations are subject to change without prior notice.
