Description
Face Material:
| Properties | Test Method | Result |
| Grammage | JIS-P8118 | 67+5g/m2 |
| Caliper | JIS-P8124 | 86 + 5microns |
Adhesive:
S-Type – Permanent Acrylic S-Type is a permanent acrylic adhesive, emulsion water based, offering a perfect combination of initial tack and strong adhesive. With outstanding adhesion to most substrates including rough surfaces. S-Type is a multi-purpose adhesive suitable for high converting speeds for optimal dispensing. Recommended for use on smooth and curved substrates with a diametre 2 25mm. The adhesive complies with FDA regulation in 21 C.F.R. Section 175.105 for indirect contact applications as the label is intended for use on the outside of food packaging material.
| Properties | Test Method | Result |
| Peel adhesion (N/25mm) | FTM 1 | 12.7 |
| Initial tack (N/25mm) | FTM 9 | 7.8 |
| Cohesion (h) | FTM 8 | ≥3 |
| Minimum application temperature | °C | 5°C |
| Service temperature | °C | -20 to 70°C |
Backing:
WG White Glassine
WG white glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment.
| Properties | Test Method | Result |
| Grammage | ISO 536 | 62 gsm |
| Caliper | ISO 534 | 53 microns |
| Opacity | ISO 2471 | 60% |
Laminate:
| Laminate shelf life |
24 months stored at 23°C/50% RH
|
| Typical Laminate caliper |
160 + 5 microns JIS-P8118 150gsm JIS-P8117
|
Note:
The substrate should be free of dust and lubricant before apply. Please use once unwrapped. If stock is to be returned to the storage shelf please ensure stock is wrapped and bagged to prevent surface dust and contamination. This product should be tested thoroughly under use condition to ensure it meets the requirements of the specific application.
