OLT Cast Gloss C58

Description

Face Material:

Properties	Test Method	Result
Caliper	ISO 536	80 g/m2
Grammage	ISO 534	86 microns
Brightness	ISO 2470	88%
Smoothness	ISO 5627	190 sec/10ml

Adhesive:

C58 Cold Temperature Permanent

A water bourne acrylic emulsion with excellent initial and final tack. A superior cold temperature adhesive with superior adhesive force where condensation is present. Adheres easily with minimal pressure. C58 is suited to smooth consistent surfaces such as glass, stainless steel, and PET.

 

Composition	Test Method	Water based acrylic
Initial tack	FTM 9	6.9 N/25mm
Peel adhesion	FTM 1	11.8 N/25mm
Cohesion	FTM 8	>3
Minimum application temperature		-20°C to +40°C
Service temperature		-40 to +70°C
Food contact		Direct contact for dry non-fatty foods

 

Backing:

WG White Glassine

WG white glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment.

Properties	Test Method	Result
Grammage	ISO 536	62 g/m2
Caliper	ISO 534	53 microns
Opacity	ISO 2471	60%

 

Laminate:

Laminate shelf life                       24 months stored at 20°C/50% RH

Typical laminate caliper             158 microns

 

The substrate should be free of dust and lubricant before apply. Please use once unwrapped, if stock is to be returned to the storage shelf please ensure stock is wrapped and bagged to prevent surface dust and contamination. This product should be tested thoroughly under use condition to ensure it meets the requirements of the specific application.

Base upon issue date circumstance Oji Label have tested products to be believed a reliable result the above technical information and recommendation. However it is not a guarantee & warranty since the products are used outside of Oji Label control, so we cannot take responsibilities for damage or consequence may occur when using the product. Oji Label do not authorize any parties of all give such guarantee and warranty,